CUÁNDO hay que CAMBIAR las PASTILLAS de FRENO de la bici?

When should you replace your bike’s brake pads?

 

HOW LONG do bike brake pads last?

DISC BRAKE PADS are a wear component on a BIKE. How fast they wear can vary a lot depending on the weather, the type of bike and how it’s used. That’s why you need to pay close attention to how they work and respond. If they make noise or you notice anything unusual, it’s a good idea to take them out and check their condition. After a ride in the rain or mud, or with very long descents where the disc brakes have been used hard, it’s important to check whether the pads are badly worn

If you like the content of these videos ⏊⏊⏊  RIDE with us on YOUTUBE ⏪⏪⏪

 

Keeping your braking at its best is very important

Pads don’t only wear from friction against the disc, but also from the heat generated by the disc and pads together. That’s why it’s important to always use the right disc and pad combination for each use. Shimano, for example, has several models with cooling fins to reduce heat, so both pads and discs last longer and braking always responds well.

 

Different types of wear depending on how you brake

It’s worth checking how your pads are wearing, and whether the wear is even or not. That way you can fix uneven wear before it’s too late. In general, pads should wear evenly front and back, top and bottom. It can be normal for pads to wear slightly more at the back than the front, because the wheel always turns in the same direction. However, if one pad is more worn than the other, it’s probably because the calipers aren’t properly aligned. If the same pad wears unevenly from front to back, the caliper may not be at the correct angle.

Wear limit and pad contamination

Pads have a wear limit that varies slightly by manufacturer. Shimano, for example, recommends a minimum thickness of 0.5 mm for the resin or metal part of the pad. Sometimes pads aren’t worn but make a lot of noise. This may be because oil has got onto the disc or pad and contaminated them. First, try cleaning them with isopropyl alcohol. If they’re still noisy after cleaning, the pad may have absorbed the oil and be contaminated. If so, they can’t be cleaned, and the only solution is to replace them with a new set of pads

If you liked this article and its video, we have a video on our channel where we ANSWER more than 10 QUESTIONS about DISC BRAKES

WE INVITE YOU TO WATCH IT

YOU MIGHT ALSO BE INTERESTED IN:

——–

WANT HELP FROM THE BEST MECHANICS?

 

Our WORKSHOP is a SHIMANO SERVICE CENTER in the centre of BARCELONA. How can we help you?

HOW do you ADJUST bike DISC BRAKES?

 

TYPES of bike BRAKE DISCS

 

HOW do you STOP bike DISC BRAKES from SQUEALING?

 

Rather have us take a look? At our bike workshop in Barcelona, a Shimano Service Center, we check your brakes, replace pads and rotors and get your braking spot on. Drop by the shop (Carrer València 337) or get in touch.

Shopping Basket