How to change SRAM brake pads on a road or gravel bike

How to CHANGE and ADJUST SRAM Force eTap AXS brake pads on a ROAD or GRAVEL bike

DISC BRAKE PADS are a wear part of your BIKE. It’s important to change them regularly to ensure good braking and longer rotor life. Whether they’re SRAM, as in this case, Shimano or any other brand, they should be changed before they reach their wear limit.

If you like the content of these videos
⏩⏩⏩  RIDE with us on YOUTUBE ⏪⏪⏪

Always keeping optimal braking is very important

Pads don’t only wear from abrasion against the rotor but also from the heat generated by the rotor and pads together. That’s why it’s important to always use the right rotor and pad combination for each use. Shimano, for example, has several models with heat sinks to minimise heat, so both pads and rotors last longer and the brakes always respond well.

 

Different types of wear depending on how the brakes are used

It’s worth checking how your pads are wearing, whether the wear is even or not. That way you can fix uneven wear before it’s too late.

In general, pads should wear evenly front and back, top and bottom. It can be normal for pads to wear slightly more at the back than at the front because the wheel always turns in the same direction. However, if one pad is more worn than the other, the calipers are probably not well balanced. If the same pad shows uneven wear from front to back, the caliper may not be at the correct angle.

Wear limit and pad contamination

Pads have a wear limit that varies slightly by manufacturer. Shimano, for example, recommends a minimum thickness of 0.5 mm for the resin or metal part of the pad.

In some cases pads may not be worn but make a lot of noise. This can be caused by oil on the rotor or pad that has contaminated them. First, try cleaning them with isopropyl alcohol. If the noise persists after cleaning, the pad may have absorbed the oil and be contaminated. In that case it can’t be cleaned and the only solution is to replace them with a new set of pads.

If you liked this article and video, we have a video on our channel where we ANSWER more than 10 QUESTIONS about DISC BRAKES

TAKE A LOOK

 

 

YOU MAY ALSO BE INTERESTED IN:

WOULD YOU LIKE HELP FROM THE BEST MECHANICS?

 

Our WORKSHOP is a
SHIMANO SERVICE CENTER
in the centre of BARCELONA
How can we help you?

 

HOW do you ADJUST bike DISC BRAKES?

 

TYPES of bike BRAKE DISCS

 

HOW to STOP bike DISC BRAKES from squeaking?

 

Rather have us take a look? At our bike workshop in Barcelona, a Shimano Service Center, we check your brakes, replace pads and rotors and get your braking spot on. Drop by the shop (Carrer València 337) or get in touch.

Shopping Basket