How to CHOOSE DISCS by brand, mount, material and size
Apart from the main brands that make complete braking systems, such as SHIMANO, SRAM and MAGURA, there are many brands that make consumables for hydraulic disc brake systems, that is, discs and pads. Each brand designs its own disc, looking for the best braking performance with the lowest weight.
If you like the content of these videos ⏩⏩⏩ RIDE with us on YOUTUBE ⏪⏪⏪
What’s the best bike brake brand?
Almost every brand today makes classic discs as well as floating discs. A floating disc is split into two parts: a braking track joined to a spider with ribs and arms. This allows a spider that’s more resistant to deformation and better tolerates the expansion of the braking track under hard braking. Although discs may look the same at first glance, their thickness varies by brand from 1.7 to 2 mm, which is why at Terra Bike Tours we don’t recommend combining brakes and discs from different brands.
Choosing a disc by mount type
Today there are two standard ways of mounting the disc to the wheel hub. On the one hand, CENTER LOCK discs have a quick-fit spline that’s removed with a cassette tool; on the other, the SIX-BOLT system is a little slower to fit. Both systems work well, but the six-bolt one takes longer to fit. There are adapters that let you convert a six-bolt disc to Center Lock, but at TBT we don’t recommend this conversion, because the more connection points you add, the more problems you can end up with.
Choosing a disc by material
As an example, we’ll focus on the types of disc by material within the Shimano range. Shimano makes discs in different materials depending on intended use. STAINLESS STEEL is an excellent material for discs: it resists abrasion and is more affordable across several performance levels. Some are used only with resin pads, and others have a special treatment for metal pads too. They’re perfect for undemanding braking: city bikes ridden on smooth surfaces at moderate speeds, or leisure bikes, are two cases where solid stainless discs perform very well at a low price. For downhill or road bikes, where conditions are more extreme, speeds are higher and temperatures get hotter, there are Ice Technologies discs, which offer better cooling. With this technology, the braking surface has an aluminium core sandwiched between two outer layers of stainless steel. Aluminium conducts heat better than steel, so these discs dissipate heat better. Lab tests show they stay 149 °C cooler than stainless steel discs. For even more performance, the maximum possible, Shimano makes Ice Tech FREEZA discs, with an extended aluminium core and radiator fins that run up to 200 °C cooler than solid stainless steel discs.
How do you know your brake disc size?
Choosing the disc size is also important. The manufacturer normally chooses the most suitable disc size for each type of bike, but if you want more braking power you can switch to a larger disc. If you change size, you’ll probably also need to change the caliper adapter. Standard disc sizes range from 140 to 160, 180 or 200 mm. A bigger disc gives more braking power, while a smaller disc has less power but also less weight. Road bikes usually have 140 or 160 mm discs. There are also 183 and 203 mm discs, which fall slightly outside the standard sizes because they come from American inch measurements
If you liked this article and its video, we have a video on our channel where we ANSWER more than 10 QUESTIONS about DISC BRAKES
WE INVITE YOU TO WATCH IT
YOU MIGHT ALSO BE INTERESTED IN:
——–
WANT HELP FROM THE BEST MECHANICS?
Our WORKSHOP is a SHIMANO SERVICE CENTER in the centre of BARCELONA. How can we help you?
HOW do you ADJUST bike DISC BRAKES?
WHEN should you REPLACE your bike’s BRAKE DISCS?
HOW do you STOP bike DISC BRAKES from SQUEALING?
Rather have us take a look? At our bike workshop in Barcelona, a Shimano Service Center, we check your brakes, replace pads and rotors and get your braking spot on. Drop by the shop (Carrer València 337) or get in touch.




