¿CUÁNDO hay que CAMBIAR los DISCOS de freno de la BICICLETA?

When should you replace your bike’s brake rotors?

How long do bike brake DISCS LAST?

If you don’t replace your disc when it’s due, you’ll start to notice NOISE, LESS BRAKING power, more PAD WEAR and, in short, less SAFETY. This is because a worn disc is no longer flat: over time the pads wear grooves into the disc and its thickness becomes uneven. This makes the pads rub and wear unevenly, you’ll feel the disc’s irregularities when braking, and in the end you’ll get less heat dissipation, more wear and everything will work worse

If you like the content of these videos ⏩⏩⏩  RIDE with us on YOUTUBE ⏪⏪⏪

How do I know which type of disc I have: Center Lock or six-bolt?

When it comes to mounting, there are two standards today: the more universal six-bolt mount, which takes a bit longer to replace, and the Center Lock disc, designed to be fitted more quickly. They’re very easy to tell apart: the first has six bolts, while the second has a splined centre that fits onto the wheel hub

How do you replace a Center Lock disc?

To fit this type of disc you’ll need the removal tool, which is the same one used to remove the cassette. Unscrew the lockring anticlockwise with this tool and a wrench for leverage until it comes loose, then you can take it off by hand. Once the old disc is off, you can fit the new one. It doesn’t matter which position it’s in; what matters is that the slightly offset side faces inwards. The outer side is where you’ll see all the specifications: brand, direction of rotation, minimum recommended thickness, etc. Start the lockring by hand to make sure it’s going on correctly, then tighten it firmly with the tool and wrench, just as you did to remove the old one. This system is very quick to fit and remove, which is its main advantage

How do you fit a six-bolt disc?

With universal six-bolt discs, the process is a little slower. To remove it, take out the six bolts, which may be Allen or Torx. Once the old one is off, you can fit the new one. As with Center Lock, it only goes on one way. There are no markings on the inner side; on the outer side you’ll find various specifications, such as the direction of rotation. Start the bolts by hand first so they don’t go in cross-threaded and damage the threads. It’s a good idea to use the new bolts that come with the disc, which sometimes also include small locking plates that connect one bolt to another. Once everything is in position, tighten the six bolts with the key. As with most components with more than one bolt, don’t fully tighten the first one; tighten them gradually and evenly. As we said, a Center Lock disc is much quicker to fit, but both systems work equally well. Do the final tightening of all the bolts to the maximum torque the manufacturer recommends. Finally, even if the disc is new, we strongly recommend cleaning it so it doesn’t contaminate the pads, whether from oils used during manufacturing or from handling

When should you replace a brake disc?

Replace discs when they’re worn from use, when they’re so bent they can no longer be straightened, or when they’ve lost their temper after reaching very high temperatures. To know whether a disc is worn, measure its thickness, always on the area where the pads make contact. Each brand is slightly different, but they always state the minimum recommended thickness. For Shimano, for example, the minimum is 1.5 mm, as shown on the disc itself. If the thickness of the braking surface is below this, it needs replacing. If you liked this article and its video, we have a video on our channel where we ANSWER more than 10 QUESTIONS about DISC BRAKES

WE INVITE YOU TO WATCH IT

——–

WANT HELP FROM THE BEST MECHANICS?

 

 

Our WORKSHOP is a SHIMANO SERVICE CENTER in the centre of BARCELONA. How can we help you?

 

TYPES of bike BRAKE DISCS

 

HOW do you ADJUST bike DISC BRAKES?

 

HOW do you STOP bike DISC BRAKES from SQUEALING?

 

Rather have us take a look? At our bike workshop in Barcelona, a Shimano Service Center, we check your brakes, replace pads and rotors and get your braking spot on. Drop by the shop (Carrer València 337) or get in touch.

Shopping Basket