Qué tipo de ACEITE llevan los frenos de DISCO Shimano de BICICLETA?

What oil do Shimano bike disc brakes use?

What OIL is used in bike BRAKES?

There are basically two types of oil used in hydraulic disc brake systems. Shimano, the leading cycling component brand, and Magura use mineral oil, while other brands such as SRAM use DOT fluid

If you like the content of these videos ⏩⏩⏩  RIDE with us on YOUTUBE ⏪⏪⏪

 

Differences in composition between DOT and mineral oil

There are several differences between the two types of oil. SRAM uses DOT fluid, also called synthetic, which is what’s normally used in cars. It’s used because of its high boiling point, meaning it handles high temperatures better. Shimano’s mineral oil comes from the distillation and refining of petroleum, while synthetic fluid is based on a solvent and a glycol ether lubricant base, along with anti-corrosion additives.

 

Pros and cons of SRAM’s DOT fluid and Shimano’s mineral oil

As we said, in terms of performance DOT has a higher boiling point than mineral oil, which makes it more resistant to high temperatures. That’s why brands like Shimano fit their braking systems with discs and pads that dissipate more heat, to offset the fact that mineral oil doesn’t handle heat as well. So DOT fluid might seem more suitable, and that’s why it’s the fluid used in cars. On bikes, however, conditions aren’t the same: the vehicle is lighter and speeds are lower than in a car. That’s why, on most bikes where speeds aren’t high or demands are lower, mineral oil is more than enough, even without cooling systems. In these cases you don’t need another type of oil. And on bikes with greater demands, such as downhill or road bikes, where descents are longer and faster, technologies developed by Shimano to lower the temperature, such as Ice Technologies, make mineral oil perfectly suitable for every type of bike. The drawback of DOT fluid is that it absorbs moisture, which doesn’t happen with mineral oil. Another disadvantage is that synthetic fluid is more corrosive to seals and rubber parts, so DOT needs a little more maintenance than mineral oil. In other words, a SRAM brake system will need a little more maintenance than a Shimano one. As you can see, each system has its pros and cons, which brands try to solve with auxiliary systems.

Why did Shimano choose mineral oil?

Basically for the reasons above. Shimano has backed mineral oil from the start, fully aware of its pros and cons. Since the biggest issue is the temperature it reaches, Shimano compensates with its Ice Technologies systems, which cool the whole system mechanically or by airflow. The faster the bike goes, and so the more cooling the system needs, the more these small radiators on the pads and cooling fins on the discs help, cooling the whole system by up to 200 °C and making up for that small disadvantage compared with DOT

If you liked this article and its video, we have a video on our channel where we ANSWER more than 10 QUESTIONS about DISC BRAKES

WE INVITE YOU TO WATCH IT

YOU MIGHT ALSO BE INTERESTED IN:

——–

WANT HELP FROM THE BEST MECHANICS?

 

Our WORKSHOP is a SHIMANO SERVICE CENTER in the centre of BARCELONA. How can we help you?

 

What’s the DIFFERENCE between HYDRAULIC and MECHANICAL BRAKES?

 

WHAT are the BEST BRAKE PADS?

 

WHEN SHOULD YOU REPLACE YOUR BIKE’S BRAKE PADS?

 

Rather have us take a look? At our bike workshop in Barcelona, a Shimano Service Center, we check your brakes, replace pads and rotors and get your braking spot on. Drop by the shop (Carrer València 337) or get in touch.

Shopping Basket