How does a bike disc brake work?

How does a bike’s hydraulic DISC BRAKE WORK?

We know that bike disc brakes evolved from automotive disc brakes, especially motorbikes, but how does a disc brake on a bike actually work?

If you like the content of these videos ⏩⏩⏩  RIDE with us on YOUTUBE ⏪⏪⏪

 

What does a hydraulic brake system consist of?

A hydraulic brake system has three distinct parts: the levers, a hydraulic circuit carrying the brake fluid, and finally a caliper holding the brake pads, which squeeze the disc attached to the wheel to slow the bike. In short: lever, hydraulic circuit, caliper, piston (or pistons, as there may be several), pads and disc. The pads are what we normally replace, since they wear the most from friction against the disc attached to the wheel. The pads sit inside the calipers, and they’re pushed by plungers called pistons, which press the pad against the disc and slow the bike. As we said, this type of braking was developed from automotive systems: it has been used in cars and motorbikes for many years and moved first to mountain bikes and now also to road, gravel and even city bikes. Hydraulic disc brakes can now be found in every cycling discipline.

What we’ve listed so far are the main parts of a disc brake, but we could go into more detail and look at what the caliper and the lever are made of, with their exploded diagrams depending on the brand. Each brand has a different breakdown with different spare parts. And why choose a hydraulic system for disc brakes? To get very powerful braking with less force on the lever. This is based on Pascal’s principle, known as the hydraulic press. Like the braking system, a hydraulic press is a device with two plungers: a small force is applied to the one with the smaller surface, and a multiplied force is produced at the one with the larger surface. By making the surface of the lever piston smaller than that of the brake pistons, the force produced at the pistons, and so at the brake, is much greater than the force we apply with our hands on the brake lever. That’s why the big advantage of disc brakes over conventional brakes is that you can brake with a single finger and with much less hand fatigue.

If you liked this article and its video, we have a video on our channel where we ANSWER more than 10 QUESTIONS about DISC BRAKES

WE INVITE YOU TO WATCH IT

YOU MIGHT ALSO BE INTERESTED IN:

WANT HELP FROM THE BEST MECHANICS?

Our WORKSHOP is a SHIMANO SERVICE CENTER in the centre of BARCELONA. How can we help you?

 

What’s the DIFFERENCE between HYDRAULIC and MECHANICAL BRAKES?

 

WHAT are the BEST BRAKE PADS?

 

HOW do you STOP bike DISC BRAKES from SQUEALING?

 

Rather have us take a look? At our bike workshop in Barcelona, a Shimano Service Center, we check your brakes, replace pads and rotors and get your braking spot on. Drop by the shop (Carrer València 337) or get in touch.

Shopping Basket